Call Toll Free 1-800-290-5960

CB Series

CB Series


Table Top Supports
Full length, 1-3/4” D x 16-gauge cold rolled steel apron channels with rounded edges and dressed off end fittings for safety.

End Legs
Constructed of all-welded1-1/4”, 14 gauge box steel tubing. Linkages are 3/16” thick by 1” wide, connected with 3/8” bolts and secured with nylon insert lock nuts.

Bench Supports
Bench tops are supported by three 1-1/16”, 14 gauge round steel tube legs. Each extends to the floor and are capped with a cushioned glide.

Table & Bench Tops
Tops are made with 45lbs density resin wood core, topped with high pressure laminate, and balanced with durable Gator™ black backer. Tops are edged with Mitchell custom DuraEdge™ a heavy polyvinyl, extended bullnose for maximum bump protection and moisture barrier, or Lotz ArmorEdge™ the original Polyurea black moisture retardant edge (MDF Core.)

Tops are attached with full threaded, hex head screws with a minimum holding power of 300lbs. Each fastener is machine driven and seated. The hex head permits normal maintenance of units if required.

Swing Locks
Rigid steel swing-locks are standard on all units. These locks clamp at apron holding two ConverTables together when in the cafeteria table mode.

Unitized Construction
Welded steel brackets and fittings solidly join and position legs to channel support aprons.

Four, 3” diameter, non-marking, oil-less ball bearing swivel casters are factory installed. Two casters are furnished with locking brakes.

Metal Finish
End legs are available in either Black Epoxy Powder Coat or Nickel Chromi-um. The understructure is black epoxy powder coat.

Laminate Choices
There are 100’s of laminate choices to consider from several laminate sources. These are available at no additional charge.